Stickybits® Pressure Sensitive Satin Monomeric Laminate 80 Micron
roll over the image to zoom in
Stickybits® Pressure Sensitive Satin Monomeric Laminate 80 Micron
Product Code: -
£0.00
£129.00
A water resistant satin PVC laminate which has been designed to eliminate reflection while maintaining colour contrast and detail.
- Durable PVC laminating film
- Water resistant
- Outdoor durability up to 2 years
- Print and colour enhancing, as well as protection
- Inbuilt UV protection
- Clear solvent-based acrylic adhesive
- Siliconised paper release liner
- Excellent for ACM and Di-Bond hoarding applications
- Strong adhesion with UV curable inks
Custom Slitting Information
- * A single product can be cut to multiple widths, there is a fee for each cut
- ** Please allow up to 10mm wastage for each cut
- At busy times, there might be a delay in dispatching your order if slitting is required
- If your requirement is urgent please contact us via our live chat or by calling the office on 01636 610700
- Customised products are non-returnable unless faulty or damaged in transit, please check your measurements carefully
| Ink Technology Compatibility | Waterbased Dye & Pigment, Solvent, Latex & UV |
| Weight | 105gsm |
| Thickness | 80 Micron |
| Finish | Satin |
| Face Material | 80 Micron Calendered Polyvinyl Chloride |
| Gloss Level (60°) | 30 ~ 45 |
| Release liner | 105gsm Siliconised Paper |
| Adhesive Type | Clear Solvent Base Acrylic |
| Adhesive Thickness | 22 Micron |
| Peel Strength 180° | 1kg/inch PSTC-1 |
| Shear Strength 0° | 48hrs/inch PSTC-7 |
| Adhesive PH Value | 7.0 |
| Width | 54", 61" |
| Length | 50m |