A superb heavy duty PVC over laminating film to protect your graphics in high-traffic areas. A premium product with a non-glare, soft-crystal finish that will bring out the best in graphics, pop-ups and roll-ups. Water resistant and with inbuilt UV protection, this hard-wearing film is designed to enhance, protect and extend the life of your prints.
- Water resistant with an outdoor durability up to 2 years
- Print and colour enhancing, as well as protection
- Inbuilt UV protection
- Siliconised paper release liner
- Excellent for pop-up and roll-up applications
- Strong adhesion with UV curable inks
Custom Slitting Information
- * A single product can be cut to multiple widths, there is a fee for each cut
- ** Please allow up to 10mm wastage for each cut
- At busy times, there might be a delay in dispatching your order if slitting is required
- If your requirement is urgent please contact us via our live chat or by calling the office on 01636 610700
- Customised products are non-returnable unless faulty or damaged in transit, please check your measurements carefully
Ink Technology Compatibility | Waterbased Dye & Pigment, Solvent, Latex & UV |
Weight | 165gsm |
Thickness | 125 Micron |
Finish | Textured |
Face Material | Calendered Polyvinyl Chloride 125 Micron |
Gloss Level | 6 ~ 10% |
Release liner | 105gsm Siliconised Paper |
Adhesive Type & Thickness | Clear Solvent Adhesive |
Adhesive Thickness | 22 Micron |
Peel Strength 180° | 1kg/inch PSTC-1 |
Shear Strength 0° | 54hrs/inch PSTC-7 |
Heat Resistance | +5 - +40° C |
Adhesive PH Value | 7.0 |
Width | 41", 54", 61" |
Length | 50m |