A superb high gloss, anti-graffiti film that will also enhance and protect your printed graphics. Designed to be durable; this film can be applied to flat, curved and even slightly corrugated surfaces and, repeatedly cleaned, over and over again.
- Ultra clear solvent based adhesive
- Clay coated silicon paper release liner
- Water resistant and with inbuilt UV inhibitors
- Enhances colours and clarity of the graphic
- Superb resistance to dirt and marking; can be used as an ‘anti-graffiti’ protective layer
- A highly durable product that can be cleaned and cleaned again
Custom Slitting Information
- * A single product can be cut to multiple widths, there is a fee for each cut
- ** Please allow up to 10mm wastage for each cut
- At busy times, there might be a delay in dispatching your order if slitting is required
- If your requirement is urgent please contact us via our live chat or by calling the office on 01636 610700
- Customised products are non-returnable unless faulty or damaged in transit, please check your measurements carefully
Ink Technology Compatibility | Waterbased Dye & Pigment, Solvent & Latex |
Thickness | 23 Micron |
Finish | Gloss |
Release liner | 90gsm one sided claycoated silicon paper |
Adhesive Type | Ultra clear solvent based |
Adhesive Strength | 4.3N/cm |
Shrinkage - Finat FTM 14 | <0.4mm |
Width | 54", 61" |
Length | 50m |