Canon IJM417 Universal Poly Canvas 260gsm

roll over the image to zoom in

Canon IJM417 Universal Poly Canvas 260gsm

Product Code: -
reward points

Choose an option from the list above...

Canon IJM417 Universal Poly Canvas  260gsm is an 100% polyester canvas with an universal matte coating suited for aqueous, latex, (eco) solvent, UVgel and UV curable inks. Please note, as it is universal across ink types it is supplied on a 3" core.


  • Photo & art reproductions
  • Indoor banners
  • POS displays
  • Indoor decoration


  • Excellent print quality
  • Good flexibility
  • Bright white surface finish
  • Cost effective
  • Universal across multiple ink types
Ink TypeAqueous, Solvent, Latex & UV / UVgel
Media TypeCanvas
Media FinishMatte
Thickness340 Micron
Backing ColourWhite
Suitable for LaminationLiquid lamination only
Indoor / Outdoor UseIndoor
PVC FreeYes
Width24", 36", 42", 60"
Core Size75mm / 3"

Printing Guidelines

Side to be printed is the outer side of the roll. Allow material to adapt to room conditions for 24 hours before printing. It is recommended to handle the media with cotton gloves. It is recommended to calibrate the printer before printing and to make a test print. 

Textiles tend to crease when fed through latex/solvent printers. For minimizing creasing and prevent risk on head-strikes always use the take-up unit of the printer. Increasing the printhead height adjustment will minimize the risk on head-strikes. Due to the heavy weight of the canvas, feed rate through the printers may not be consistent, causing prints to differ slightly in size from print to print. 

To optimize print quality, print-mode should be set for highest print quality. Ink restrictions and printer settings have to be set for specific printer ink combinations to obtain the best results. Canon media profiles include recommended ink restrictions and printer parameters. Depending on environment and application, printer parameters may have to be adjusted slightly in order to obtain the best results.

Application Guidelines

Allowing the prints to dry at least 24 hours before finishing is strongly advised. 

When using for banners or other hanging applications, hemming the edges is recommended. When applying grommets, they should be inserted in double-hemmed edges. Corner grommets should be placed where the length and width hems cross, so that the grommet goes through four layers. 

Using glue or pressure sensitive adhesives is not recommended, as this does not prevent the material from natural environmental shrinkage over time. Liquid laminates are compatible and provide excellent surface protection. Always pretest the liquid laminate for compatibility prior to using. 

It is not recommended to overlaminate with pressure sensitive laminates because they do not have complete contact with the surface of the textured canvas.

Colour Profiles

Canon develops high-quality colour profiles for media / ink / printer / RIP combinations. Check availability of profiles for your printer on