A white, high opacity, rigid PVC film with a matt microporous coating for indoor roll-up displays and display stands.The film is suitable for water based printing with dye and pigmented inks.
- Roll-up display
- Display stands
- Exhibition panels
- Indoor signage
- Instant-dry, microporous coating
- Brilliant colour reproduction
- Non-reflective matt surface
- Suitable for dye and pigment inks
- Highly opaque, scratch resistant
|Waterbased Dye & Pigment, UVgel
|Suitable for Lamination
|Cold Pressure Sensitive
|Indoor / Outdoor Use
|594mm, 841mm, 36", 42"
|75mm / 3"
Side to be printed is the outer side of the roll. By nature the film induces a static charge when (un)winding, therefore precautions should be made to prevent this from influencing the print. Use of gloves is recommended. Make sure that the media does not come into contact with grease, oil, silicon, and dirt to avoid printing defects.
Print results will vary for different printer/ink combinations. Canon media profiles include recommended ink/toner restrictions and printer parameters. Depending on environment and application, printer parameters may have to be adjusted slightly in order to obtain the best results. For UVgel technology, only compatible in matte print modes.
It is necessary to protect the surface if it is subject over a long time to abrasion or any other mechanical influences, to dirt or humidity. The lamination can be done right to the edges or over the edges. The user should check before using what is more appropriate.
We recommend to use self-adhesive laminating foils for cold lamination.