Canon IJM566 Front Print Backlit Film 215 Micron

roll over the image to zoom in

Canon IJM566 Front Print Backlit Film 215 Micron

Product Code: -
reward points

Choose an option from the list above...

A polyester film for high quality backlit applications and is a front-print backlit with a matt surface. The coating is fast drying and designed for outdoor applications, high density and shows saturated colours


  • Indoor and outdoor light box
  • Airport, store advertising
  • Vending machine-displays
  • Trade shows, exhibitions
  • Brilliant and vivid colours, excellent colour gamut
  • Supports high ink load for rich colours and dark blacks
  • Productive fast drying with waterbased inks


  • Anti-glare smooth matt surface
  • Water resistant coating
  • Dimensional stable and scratch resistant
  • Anti-static reverse side
  • Good lamination properties
  • Compatible with dye, pigmented and latex inks
  • Suited for outdoor applications
Ink TypeWaterbased Dye & Pigment, UVgel, Latex
Media TypeBacklit Film
Media FinishMatt
Thickness215 Micron
Suitable for LaminationCold pressure sensitive
Indoor / Outdoor UseIndoor
PVC FreeYes
Core Size50mm / 3"

Printing Guidelines

Allow material to adapt to room conditions for 24 hours before printing. Side to be printed is the outer side of the roll. Make sure that the media comes not into contact with grease, oil, silicon, and dirt to avoid printing defects. It is recommended to handle the media with cotton gloves. Insert the paper with care in the printer. Incorrect loading can cause skewing or creasing. It is recommended to calibrate the printer before printing and to make a test print. 

Print results will vary for different printer ink combinations. Ink restrictions and printer settings should be set for specific printer-ink combinations to obtain the best results. Canon media profiles include optimal ink and printer settings for Canon supported printers. Depending on fluctuations in environment, printer, ink, media and applications, printer parameters may have to be adjusted slightly, to obtain the best results. 

Compatibility and Profiles

The media can be used without lamination. However, we recommend protecting the film if it is subject to mechanical abrasion. Let the prints dry for at least 24hrs before laminating. Use only pressure sensitive laminates.